The great outdoors by Minka Lavery 8206-94 Manuel d'instructions

Naviguer en ligne ou télécharger Manuel d'instructions pour Non The great outdoors by Minka Lavery 8206-94. the great outdoors by Minka Lavery 8206-94 Instructions / Assembly Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 1
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
INSTALLATION INSTRUCTIONS
Model # 8206
READ AND SAVE THESE INSTRUCTIONS
WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.
1.
Shut off power at the circuit breaker and remove old
fixture including mounting hardware.
2.
Carefully unpack your new fixture and lay out all the
parts i
n a clear area. Take care not to misplace any
small parts necessary for installation.
3.
Unscrew the cap nut (F) then move the top cover (J),
insert the nipple(C) with the rubber (B) and the f
inial (A)
into the top cover (J), have the key washer (D) through
the nipple (C) with the hex nut (E) tightly inside the top
cover (J) (Fig.1).
4. Pull black, white and ground wires out of post (I).
5. Connect electrical wires while supporting the lantern. If
your post has a ground wire (green or bare copper),
connect the fixture ground wire to it. If not, consult your
electrician for proper grounding. After wires are
connected, tuck them carefully inside the post cup (G).
Align the lantern with post (I) and secure with sheet
metal screws (H). (Fig.1&2)
6. At this point,
install the light bulb in accordance with the
fixture specificationDO NOT EXCEED THE
MAXIMUM WATTAGE RATING!
7. Replace the top cover (J) and secure with cap nut (F).
Your installation is now complete. Return power to and test
the fixture.
Fig. 1
BARE COPPER(GROUND)
Fig.2
FIXTURE
WIRES
WHITE
BLACK
(HOT)
WIRES
HOUSE
GREEN OR
WHITE
(NEUTRAL)
WIRES
HOUSE
(GROUND)
COPPER
BARE
FIXTURE
WIRES
BLACK
WIRES
FIXTURE
GREEN OR
HOUSE
WIRES
CAUTION
-
RISK OF FIRE CONSULT A
QUALIFIED ELECTRICIAN TO ENSURE
CORRECT BRANCH CIRCUIT CONDUCTOR
R
F
J
I
Vue de la page 0
1

Résumé du contenu

Page 1 - INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS Model # 8206 READ AND SAVE THESE INSTRUCTIONS WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER. 1. Shut off po

Commentaires sur ces manuels

Pas de commentaire