The great outdoors by Minka Lavery 8764-166 Guide d'installation

Naviguer en ligne ou télécharger Guide d'installation pour Non The great outdoors by Minka Lavery 8764-166. the great outdoors by Minka Lavery 8764-166 Installation Guide Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 1
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
INSTALLATION INSTRUCTIONS
For Model 8764
WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.
Fig. 1
Fig. 2
HANGING THE FIXTURE (Fig. 1)
1. Shut off the power at the circuit breaker and remove old fixture,
including the crossbar.
2. Carefully unpack your new fixture and lay out all the parts on a
clear area. Take care not to lose any small parts necessary for
installation.
3. Thread the 2 Mounting Screws (B) to the Cross Bar(C), and
then secure with 2 Lock Nuts.(You can adjust the length of the
screws if necessary.)
4. Attach the Cross Bar(C) to the Outlet Box (A)(not supplied
using the 2 screws provided with the Outlet Box(B).
5. Install bulbs. (Type-B. not supplied)
6. Attach cover (D) to the Fixture using the 2 Screws (E)
7. Turn on the power at fuse or circuit box.
CONNECTING THE WIRES (Fig. 2)
1. At this point, connect the electrical wires as follows:
Connect the black wire from the fixture to the black (hot) house
wire. Connect the white wire from the fixture to the white (neutral)
house wire. Make sure all wire nuts are secured. You may wrap
the connections with electrical tape. If your outlet has a ground
wire (green or bare copper), connect fixture’s ground wire to it.
Otherwise, connect fixture’s ground wire directly to the crossbar
using the green screw provided. Tuck the wire connections neatly
into the ceiling junction box.
DO NOT EXCEED THE MAXIMUM WATTAGE RATING!
Your installation is now complete. Return power to the junction
box and test the fixture.
MIN 90 C SUPPLY CONDUCTOR
FIXTURE
WIRES
Black or
Smooth
H
O
U
S
E
WIRES
Black
(Hot)
FIXTURE
WIRES
White or
Ribbed
H
O
U
S
E
WIRES
White
(Neutral)
FIXTURE
WIRES
Bare
Copper
(Ground)
H
O
U
S
E
WIRES
Green or
Bare
Copper(Gr
ound)
Vue de la page 0
1

Résumé du contenu

Page 1 - INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS For Model 8764 WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER. Fig. 1 Fig. 2 HANGING THE FIXTURE (Fig. 1) 1. Shu

Commentaires sur ces manuels

Pas de commentaire