The great outdoors by Minka Lavery 9060-91 Manuel d'instructions télécharger pdf

INSTALLATION INSTRUCTIONS

For Model 9060

READ AND SAVE THESE INSTRUCTIONS

WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.

AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.

Fig.1

Fig. 2

Fig. 3

HANGING THE FIXTURE (Fig. 1)

1. Shut off the power at the circuit breaker and remove the old

fixture including the mounting hardware.

2. Carefully unpack your new fixture and lay out all the parts

on a clear area. Take care not to lose any small parts

necessary for installation.

3. Thread the 2 mounting screws (E) into the mounting

plate(C) spaced the same distance apart as the holes in

the fixture back plate. (You can adjust the length of the

screws if necessary.)

4. Attach the mounting plate (C) to the outlet box (A) (not

supplied) with mounting screws (B). (Size: #8-32*0.78"L).

CONNECTING THE WIRES (Fig. 2)

5. Connect the electrical wires as shown in Fig.2.Making sure

that all wire connectors are secured. If your outlet box has

a ground wire (green or bare copper), connect the fixture’s

ground wire to it. Otherwise, connect the fixture’s ground

wire directly to the circular strap using the green screw

provided.

COMPLETING THE INSTALLATION (Fig. 1)

6. Align the fixture (M) to the mounting plate (C) and secure

with cap nuts (F).

7. Attach the bottom finial (P) to stem (O) and top finial (G) to

the top cover (K).

8. Fix the glass into the fixture body (M) with the clips,

gaskets and screws provided.

9. Install the bulb (A-19medium base, not supplied) in

accordance with the fixture’s specifications. DO NOT

EXCEED THE MAXIMUM WATTAGE RATING! (NE PAS

DEPASSER LA PUISSANCE NOMINALE MAXIMALE!)

10. Connect the top cover (K) to the fixture body (M) with

screws (N)

11. To prevent moisture from entering the outlet box and

causing a short, use clear caulking (i.e. Indoor/Outdoor

Silicone Sealant) to outline the outside of fixture back plate

where it meets the wall leaving a space at bottom to allow

moisture a means to escape.

(Fig. 3)

Your installation is now complete. Return power to the

junction box and test the fixture

FIXTURE

WIRES

Black or

Smooth

HOUSE

WIRES

Black

(Hot)

FIXTURE

WIRES

White or

Ribbed

HOUSE

WIRES

White

(Neutral)

FIXTURE

WIRES

Bare

Copper

(Ground)

HOUSE

WIRES

Green or

Bare

Copper(Gr

ound)

Caulking

Backplate

Résumé du contenu

Page 1

INSTALLATION INSTRUCTIONS For Model 9060 READ AND SAVE THESE INSTRUCTIONS WARNING! SHUT POWER OFF AT FUSE OR CIRCUI

Commentaires sur ces manuels

Pas de commentaire

The great outdoors by Minka Lavery 9060-91 Manuel d'instructions

Naviguer en ligne ou télécharger Manuel d'instructions pour Non The great outdoors by Minka Lavery 9060-91. the great outdoors by Minka Lavery 9060-91 Instructions / Assembly Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Non The great outdoors by Minka Lavery 9060-91